Sensors in extreme areas
modular systems · ready to apply
The miniaturized 8.2 GHz 3D E-Field Analyzer LSProbe ensures unattended, uninterrupted measurements combined with high resolution, high speed and low noise over the entire test period. With the galvanically insulated power supply, the need for batteries is now eliminated. The field probe does not only measure average values but the time course of fields. With an unprecedented wide dynamic range and fast pulse response, LSProbe provides the user completely new measuring options. The LSProbe enables a higher efficiency through shorter and lower-cost testing intervals.
- Frequency range from 10 Hz - 8.2 GHz (Standard 10 kHz - 8.2 GHz)
- Fastest sampling rate (pulse measurement)
- Highest precision (resolution and linearity)
- Widest dynamic response for entire frequency range
- Rugged, eye-safe optical system
- No warm-up wait - immediate measurement
- User-centered terms of warranty and service
Driver available for:
- Rohde & Schwarz - ELEKTRA
- Rohde & Schwarz - EMC32 - Version 10.0
- Nexio - BAT-EMC
- Ametek - Compliance 5
- ETS-Lindgren - TILE!
- Dare!! - RadiMation
- Teseq - WIN 6000
- Techno Science Japan - TEPTO
- AR - Emcware
- LSProbe 1.2 Quick Start Guides, rev. 11/2020
EN CS ES FR IT
JA KO PL RU ZH ZHT - LSProbe 1.2 Datasheet, rev. 10/2020
EN ZH - LSProbe 1.2 User's Manual, rev. 11/2020
- LSProbe 1.2 Software Installer, rev. 11/2020
- LSProbe Floor Probe Stand Datasheet
- LSProbe Multi-Probe Datasheet
- LSProbe 1.2 Typical Performance Data
- Application Note 4, Reliable Operation of Laser-Powered Electric-Field Probes
- Application Note 6, Calibration of LSProbe 1.2
- Application Note 8, Isotropy of LSProbe 1.2
- LSProbe 1.2 Typical Performance Data
- WIS Report part 1: Measuring Pulsed Fields
- WIS Report part 2: Measuring Radio Jammers
- LSFrame Datasheet
- LSMove Preliminary Datasheet
- LUMILOOP Reference List
- Warranty Conditions
- Variant E, standard, 10 kHz to 8.2 GHz
- Variant F, low frequency, 10 Hz to 8.2 GHz
- Variant G, 15 kV/m, 10 kHz to 8.2 GHz
- Variant X, customized, extended field strength and frequency range

The LSPM Triple High-Speed Powermeter is a three channel, high-speed, high accuracy and high dynamic range RF field probe. The high sampling rate allows for high resolution time-domain signal anlysis. The power meter can be synchronized with signal generators to realize high resolution pulse analysis. The LSPM can be combined with LUMILOOP´s LSProbe E-field probes to accelerate EMC measurements according to IEC 61000-4-3 and 61000-4-21.
- Frequency range from 9 kHz - 6 (12) GHz
- Accurate measurements from -50 dBm to at least 20 dBm
- Dynamic range of 100 dB for many frequencies
- Pulse analysis at 200 MSamples/s resolution
- Compensation of linearity, frequency and actively controlled internal temperature
- Accelerates EMC measurements exceeding factor 100 over conventional setups
Driver available for:
- Rohde & Schwarz - EMC32
- Nexio - BAT-EMC
- Ametek - WIN 6000
- LSPM 1.0 Datasheet, rev. 10/2020
EN ZH - LSPM 1.0 Manual, rev. 11/2020
- LSPM 1.0 Software Installer, rev. 11/2020
- 1-Channel
- 2-Channel
- 3-Channel
Potential lead user can have their first experience with the LS250. The LS250 makes an optically powered sensor communication tangible for everyone. The universal interfaces ensure easy integration into customer-specific systems. The system enables energy-intensive applications and rapid feasibility studies for new sensors. With its maximum output power of 250 mW, it is applicable for the vast majority of electric sensors. The LS250 ADVANCED has the innovative and versatile LUMILOOP ASIC integrated for the first time.
- Power supply system: laser source → glass fiber → solar cell
- Full galvanic isolation through fiber optic cables (length up to 1,000 m)
- Replaces shielded cables, batteries and transformers
- Noise-free supply of sensors, actuators and transducers
- Sensor down link data rate 25 Mbit/s
