LSFrame is LUMILOOP’s set of solutions for straight forward and reliable integration of one or more LUMILOOP products in a 19 inch rack. LSFrame can be equipped with LUMILOOP’s LSProbe 1.2 | LSProbe 2.0 Laser-Powered E-Field Probes, LSPM 1.0| LSPM 2.0 High-Speed RF Power Meters, LSPM+ High-Speed RF Power Meters, as well as LSPM 1.1 | LSPM 2.1Laser-Powered RF Power Meters and and all +-Devices, such as CI-250+, Computer Interface with Touch Screen and Ethernet connection.
LUMILOOP compiled pre-defined sets for the most common measurement tasks according to international standards. Those well-thought-out LSFrame systems come with everything you need to start measuring in no time. The flexible LSFrame portfolio also supports individual and expansible Multi-Device Systems. Contact LUMILOOP support if you need advice selecting the right components.
LUMILOOP delivers every LSFrame system fully assembled and tested, in a portable shallow 19 inch plastic rack. All LUMILOOP devices are controlled via the same software. Operating multiple and mixed device systems never was easier!
LUMILOOP offers an all-round carefree service of accredited calibration according to ISO 17025. This includes checking and inspection of your measuring equipment and performing the accredited calibration for you.
LUMILOOP Multiprobe Setups
LUMILOOP Multiprobe setups allow for measuring ISO 11451-2, ISE 11451-5, ISO 11452-11, IEC 61000-4-21, IEC 61000-4-3.
Downloads & Documents
For detailed information please click the buttons.
The Multi-Probe System 4x LSProbe consists of 4x laser-powered E-Field Probes (type by choice), 4x Computer Interface CI-250 and LUMILOOP Software Package on USB Drive.
The Multi-Probe System includes a LSFrame 1.0 Basic, 2x Front Panels for 2x Computer Interface and 1 LSFrame 19” Case for Product Integration. All necessary cables are being supplied. Before delivery the whole system is assembled and tested.
Multi-Probe System 4x LSProbe with 1x CI-250+ and 3x CI-250
The Multi-Probe System is also available with CI-250+ Upgrade.
The system consists of 4x LSProbe laser-powered E-Field Probes (type by choice), 1xComputer Interface CI-250+ with touch screen and Ethernet interface and 3x CI-250 and suitable LUMILOOP Software Package on USB Drive.
The Multi-Probe System includes 1x 19″ Rack Mount Kit for 1x CI-250+ and 1x CI-250,1x 19″ Front Panel for 2x Computer Inferface CI-250 and 1 LSFrame 19” Case for Product Integration. All necessary cables are being supplied. Before delivery the whole system is assembled and tested.
The Multi-Probe System 8x LSProbe consists of 8x laser-powered E-Field Probes (type by choice), 8x Computer Interface CI-250 and LSProbe Software Package on USB Drive.
The Multi-Probe System includes a LSFrame 1.0 Product Integration Frame – Basic, 1x Front Panel for 10 CI-250, 1x Front Panel for 10 E2000 Cpupler,and 1 LSFrame 19” Case for Product Integration. All necessary cables are being supplied. Before delivery the whole system is assembled and tested.
The LSFrame 1.0 Product Integration Frame allows for Multi-Probe Systems up to ten LSProbe Field Probes. The USB controlled system comes with a power supply and synchronization unit. Height: 1 rack unit
The LSFrame 19 inch rack serves as case for product integration up to 6 rack units (6U). It is intended for use with LSFrame 1.0 Basic (part numbers 3001). The rugged design allows for safe and easy transport. Height: 6 rack units
Part No. 3011
19″ Front Panel, 10x
E2000 Coupler
The front panel for 19 inch rack mount holds up to ten duplex E2000 couplers (not incl.). Height: 1 rack unit
Part No. 3021
19″ Front Panel, 2x Computer Interface CI-250
The front panel for 19 inch rack mount holds up to two Computer Interfaces CI-250. The two holes allow for integration of two E2000 couplers (not incl.). On request we offer a blind panel to cover unused position. Height: 1 rack unit
Part No. 3022
19″ Front Panel, 2x Computer Interface CI-250 and 1x LSPM Power Meter
The front panel for 19 inch rack mount allows to hold one LSPM Power Meterand up to two Computer Interfaces CI-250. The two holes allow for integration of two E2000 couplers (not incl.). On request we offer a blind panel to cover unused position. Height: 2 rack units
Part No. 3023
19″ Front Panel, 10x Computer Interface CI-250
The front panel for 19 inch rack mount holds up to ten Computer Interfaces CI-250. On request we offer a blind panel to cover unused position. Height: 4 rack units
Part No. 3024
19″ Front Panel, 2x LSPM Power Meter
The front panel for 19 inch rack mount holds up to two LSPM Power Meter. On request we offer a blind panel to cover unused position. Height: 2 rack units
Part No. 3025
19″ Rack Mount Kit, 1x CI-250+ with blind panel
Mounting kit for 19 inch rack mount, that allows to hold one CI-250+. The E2000 optical coupler can be connected via the cutout (not incl.). Height: 2 rack units
Part No. 3026
19″ Rack Mount Kit, 1x CI-250+ and CI-250
Mounting kit for 19 inch rack mount, that allows to hold one CI-250+and one CI-250. The E2000 optical coupler can be connected via the cutout (not incl.). Height: 2 rack units
Part No. 3027
19″ Rack Mount Kit, 1xCI-250+ and 1x LSPM Power Meter
Mounting kit for 19 inch rack mount, that allows to hold one CI-250+ and one LSPM Power Meter(either LSPM 1.0 or LSPM 2.0). The E2000 optical coupler can be connected via the cutout (not incl.). Height: 2 rack units
Part No. 3028
19″ Rack Mount Kit, 1x LSPM+ Power Meter and blind panel
Mounting kit for 19 inch rack mount, that allows to hold one LSPM+ Power Meter(either LSPM 1.0+ or LSPM 2.0+). Height: 2 rack units
Part No. 3029
Downloads & Documents
For detailed information please click the buttons.
